基于5-(4-(2,6-二(2-吡嗪基)-4-吡啶基)苯氧基)间苯二甲酸的Mn(Ⅱ)和Ca(Ⅱ)配位聚合物的合成与晶体结构

采用对苯二甲酸为模板剂,溶剂热法合成了2个以5-(4-(2,6-二(2-吡嗪基)-4-吡啶基)苯氧基)间苯二甲酸(H₂L)为配体的金属-有机配位聚合物：{[MnL] ·0.5H₂O}_n (1),{[CaL(H₂O)₂]·H₂O}_n (2)。通过X-射线单晶衍射,元素分析和红外光谱进行了结构表征。结构分析表明,1具有(3,3)-连接的不同手性型二维层面结构,这些交替出现的单手性左旋型和右旋型二维平面通过配体的吡啶环与吡嗪环间π…π堆积作用构成了三维超分子结构;2是通过L^2-配体羧基桥连接相邻的Ca(Ⅱ)金属中心,形成一条平行于b轴方向的一维链结构。研究了配位聚合物的热稳定性和2的荧光性质。     

钴( Ⅱ)与1,3-间苯咪唑及间苯二甲酸根构筑的两个配位聚合物的合成、晶体结构及性质

以间苯咪唑(1,3-bib)和间苯二甲酸(H2MPA)为配体,在温和的水热条件下,合成了Co( Ⅱ)的2个配位聚合物{[Co(1,3-bib)(MPA)(H2O)2]·H2O}n(1)和{[Co2(1,3-bib)2(MPA)2]·5H2O}n(2),分别用X-射线单晶衍射、元素分析、IR和热重等手段对它们进行了表征,结果表明,配位聚合物1为1D层状结构,属于正交晶系,Pnma空间群;配位聚合物2为双核2D结构,属于三斜晶系,P1空间群。在室温下研究了它们的光学性质。     

Synthesis of a novel naphthyl-based self-catalyzed phthalonitrile polymer

A novel naphthyl-based self-catalyzed phthalonitrile monomer was prepared via nucleophilic displacement reaction. The structure was characterized by Fourier infrared spectrum (FT-IR) and nuclear magnetic resonance (1H NMR). The polymerization mechanism was explored. Thermal properties were characterized by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), which demonstrated self-promoted behavior and excellent heat resistance.     

基于制备接枝型分子印迹膜构建农药电位型电化学传感器及其检测性能研究

基于分子设计,以氯甲基化聚砜(CMPSF)为基膜,阴离子单体对苯乙烯磺酸钠(SSS)为功能单体,N,N'-亚甲基双丙烯酰胺(MBA)为交联剂,在表面引发体系-NH2/S2O2-8的作用下,采用"接枝聚合与分子印迹同步进行"的分子表面印迹新技术,制备了接枝型农药抗蚜威分子印迹膜(MIM)。采用红外光谱(FITR)和光学显微镜(OM)对该分子印迹膜进行表征,通过等温结合实验与竞争吸附实验,考察了抗蚜威分子印迹膜的分子识别性能与机理。以该印迹膜作为敏感膜,构建了抗蚜威电位型传感器,并对其检测性能进行了考察。结果表明,所制备的接枝型印迹膜对模板抗蚜威分子具有特异的识别选择性和优良的结合亲和性,结合容量高达92μg/cm2,相对于分子结构与抗蚜威相似的阿特拉津,印迹膜对抗蚜威的选择性系数为4.537。在p H 4.0的水介质中,传感器膜电极的电位响应与抗蚜威浓度对数在1.0×10-6~1.0×10-3mol/L范围内呈良好的线性关系(r=0.999 9),其检出限为2.5×10-8mol/L;以抗蚜威分子印迹膜为敏感膜所构建的电位型传感器,其构建过程简捷,检测灵敏准确,电位响应快速(t10 s)。     

具有双螺旋链结构的3-吡啶丙烯酸镝配合物的水热合成及晶体结构

采用水热法制备了一种新型稀土配位聚合物[Dy(3-PA)3(H2O)]n(3-PA=3-吡啶丙烯酸)(1),并通过X射线单晶衍射结构分析、元素分析、红外光谱、热重分析对配合物1进行了结构表征.结构分析表明,标题配合物属于三斜晶系,Pī空间群,晶胞参数为:a=0.617 16(5)nm,b=1.270 45(11)nm,c=1.564 03(13)nm,α=111.557 0(10)°,β=90.307 0(10)°,γ=95.342 0(10)°,V=1.134 54(16)nm3,Z=2.金属离子Dy(III)通过配体3-AP羧基的桥联作用,链接成为一维双螺旋链状配位聚合物.     

罗丹明B分子印迹固相萃取小柱的研制及应用

研制一种对罗丹明B具有特异性识别性能的分子印迹固相萃取小柱。用沉淀聚合法制备罗丹明B分子印迹聚合物,通过静态平衡吸附实验及固相萃取实验表征其性能,并对市售辣椒样品中的罗丹明B进行测量。罗丹明B模板聚合物的吸附能力明显优于空白聚合物;印迹固相萃取小柱对罗丹明B标准溶液(0.05 mmol/L)一次性萃取率为98.24%,实际样品测量的回收率为90.0%~95.0%,测定结果的相对标准偏差为0.9%~1.7%(n=3)。罗丹明B分子印迹固相萃取小柱选择性好、萃取率高,可应用于食品、化妆品检测等相关领域。     

Water‐Soluble Molecularly Imprinted Nanoparticles (MINPs) with Tailored,Functionalized, Modifiable Binding Pockets

Construction of receptors with binding sites of specific size, shape, and functional groups is important to both chemistry and biology. Covalent imprinting of a photocleavable template within surface–core doubly cross‐linked micelles yielded carboxylic acid‐containing hydrophobic pockets within the water‐soluble molecularly imprinted nanoparticles. The functionalized binding pockets were characterized by their binding of amine‐ and acid‐functionalized guests under different pH values. The nanoparticles, on average, contained one binding site per particle and displayed highly selective binding among structural analogues. The binding sites could be modified further by covalent chemistry to modulate their binding properties.     

Covalent Grafting of Coordination Polymers on Surfaces: The Case of Hybrid Valence Tautomeric Interphases

We have developed a novel approach for grafting coordination polymers, structured as nanoparticles bearing surface reactive carboxylic groups, to amino‐functionalized surfaces through a simple carbodiimide‐mediated coupling reaction. As a proof‐of‐concept to validate our approach, and on the quest for novel hybrid interphases with potential technological applications, we have used valence tautomeric nanoparticles exhibiting spin transition at or around room temperature. SEM and AFM characterization reveal that the nanoparticles were organized chiefly into a single monolayer while X‐ray photoelectron spectroscopy (XPS) measurements confirm that the nanoparticles retain a temperature‐induced electronic redistribution upon surface anchorage. Our results represent an effective approach towards the challenging manufacture of coordination polymers.     

Tuning the energy gap of conjugated polymer zwitterions for efficient interlayers and solar cells

Narrow band gap conjugated polymer zwitterions (CPZs) were synthesized by Suzuki polymerization and characterized to understand their electronic properties and utility as cathode modification layers in solar cells. The polymers were prepared from diketopyrrolopyrrole (DPP) and iso-indigo monomers containing sulfobetaine (SB) pendant groups, benefiting from an ion-rich aqueous phase in the polymerizations. UV–vis absorption spectroscopy revealed the optical energy gap value for the CPZs, ranging from 1.7 to 1.2 eV. Ultraviolet photoelectron spectroscopy of the CPZs as thin layers on Ag metal showed that the pendent zwitterions impart an interfacial dipole (Δ) to the metal and a work function reduction of ∼0.9 eV. OPVs fabricated using a conventional bulk heterojunction (BHJ) device architecture of ITO/PEDOT:PSS/(PTB7:PC₇₁BM)/CPZ/Ag led to dramatic improvements in power conversion efficiency (PCE) values relative to devices having bare Ag cathodes (PCE < 2% for bare Ag vs. 6.7–7.7% for CPZ/Ag). The benzothiadiazole (BT)/DPP polymer denoted as PT₂BTDPPSB gave an optimal PCE of 7.7% in a conventional BHJ OPV device architecture fabricated on a Ag cathode. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 327–336     

High capacity and cycling stability of poly(diaminoanthraquinone) as an organic cathode for rechargeable lithium batteries

Poly(1,5‐diaminoanthraquinone) is synthesized by oxidative polymerization of diaminoanthraquinone monomers and investigated as an organic host for Li‐storage reaction. Benefiting from its high density of redox‐active, Li⁺‐associable benzoquinone groups attached to conducting polyaniline backbones, this polymer undergoes its cathodic reaction predominately through Li⁺‐insertion/extraction processes, delivering a very high reversible capacity of 285 mAh g^?1. In addition, the PDAQ polymer cathode exhibits an excellent rate capability (125 mAh g^?1 at 800 mA g^?1) and a considerable cyclability with a capacity retention of ～160 mAh g^?1 over 200 cycles, possibly serving as a sustainable, high capacity Li⁺ host cathode for Li‐ion batteries. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 235–238